What are the tsargov interior doors made of?
Glass, frame, paneled and solid models of interior doors are familiar to everyone, but not everyone knows about tsargovye canvases. At the same time, more and more manufacturers are adding them to their collections. Today, king-shaped eco-veneer doors with various designs and color schemes are available on the market. What is their device and advantages over other designs?
Features of the device of tsargovyh cloths
The basis of the design of the king interior doors is a pair of vertical racks acting as load-bearing side parts. They are connected to each other by transverse profiles. The simplest configuration involves three bars:
- above;
- below;
- in the middle.
The manufacturer can change their number, depending on their vision of the design. However, the more of them, the higher the rigidity of the frame. The space between the transverse profiles can be filled with various fragments from other materials. For example, interior doors of tsargovye ekoshpon are covered with artificial veneer, which can very accurately imitate any kind of wood.
At first glance, it may seem that the tsargovoe canvas is similar to the paneled one – both have a frame and a variety of inserts. This is where their similarity ends. The fundamental difference between these models is that the additional elements of the king door have an identical or slightly smaller thickness in comparison with the other parts of the structure. This factor determines their high strength. Inserts on panel panels are always much thinner than the main elements, so the rigidity of such a configuration completely depends on the reliability of the frame used.
As for the advantages of king interior doors, it can be noted here:
- long service life and maintainability;
- resistance to various external factors;
- quick change of the decor.
Long service life and maintainability
The high strength of this type of canvases has already been mentioned above. With proper care, compliance with operating conditions and monitoring of their condition, such doors can last much longer than most analogues. Those who decided to buy king-sized eco-style doors can save significantly in the long run.
The operational life is also largely due to the high maintainability. The canvas is assembled according to the type of constructor. Actually, if any component fails, you can dismantle it by replacing it with a new one. It is not necessary to change the upholstery of the entire sash or to paint, it is enough just to replace the insert or the bar and continue to use the door further.
Resistance to various external factors
The design of the king panels assumes a minimum number of glued joints, so they are practically not characterized by deformation caused by changes in temperature and humidity. The geometry of the flaps does not change much during the entire service life. This feature allows us to talk about the versatility and the possibility of using it in any room of a residential building, especially if we are talking about eco-veneer king doors – the presence of an ecological veneer finish creates additional protection from mechanical damage and moisture penetration inside.
Quick change of decor
This advantage results from maintainability. Since any element can be replaced with a new one, it is not necessary to install a similar one in color or design. By replacing the slats, you can get a completely different canvas in appearance, while spending significantly less than it would take to purchase a new door or varnishes, paints and decorative films. King doors are one of the best solutions for those who often like to transform a living room and change its style. You can reduce or increase the number and geometry of horizontal bars, add, remove or change inserts.
The main disadvantages
For the sake of objectivity, when discussing king constructions, it is necessary to mention their disadvantages, which, based on numerous reviews, are practically not observed. It is important to take into account that these doors are exclusively interior doors, so resistance to break-ins, additional insulation and other similar factors can be neglected.
The main disadvantage of the king door ekoshpon is a fairly large weight. On many models, the inserts and sidewalls are made of fairly heavy materials. However, such a disadvantage can be easily eliminated with more powerful loops and the use of 3 canopies instead of two.
King interior doors Profilo Porte
The collection of Italian doors Profilo Porte, presented by the domestic factory of interior doors "MariaM", has many series, among which there is one dedicated to tsargov canvases. The doors are finished with a modern polypropylene coating, with a detailed imitation of the wood texture.
Today, the series includes 41 single models, which differ from each other in the number of horizontal profiles and decorative elements. Under each door, you can choose a color-from light to dark shades. All canvases are made using borderless technology and are supplied with a box mounting system, doborami, platbands and proven high-quality accessories.
Profilo Porte king cloths are made on modern equipment from high-quality raw materials, have quality certificates, as well as an official warranty from the manufacturer. You can buy the products of the collection directly from the manufacturer, as well as from dealers represented in many cities of Russia. Both a single order and a wholesale order with significant discounts are possible. You can choose the right one in the corresponding section of the site. The king's doors are represented by a series called "PS". If you have any questions, leave your contacts on the website, or contact the company's representatives at the specified phone numbers.
Pub date: 2019.04.23